User`s manual

1
Introduction
7
1.1 Features and Specifications
1.1.1 Features
Chipset
• Intel
®
875P chipset
- Intel
®
82875P Memory Controller Hub (MCH)
- Intel
®
82801ER I/O Controller Hub (ICH5R)
Processor
The system board is equipped with Socket 478 for installing one
of the following supported processors.
• Intel
®
Pentium
®
4 (Prescott and Northwood) processor up to
3.2GHz+
- Intel Hyper-Threading Technology
- FSB: 533MHz and 800MHz
• Intel
®
Celeron
®
processor
- 400MHz system data bus
Note:
Refer to section 1.2 and appendix A for more information on
the Hyper-Threading Technology.
System Memory
• Supports dual channel (128-bit wide) memory interface
- Each channel supports 2 DIMM sockets
• Supports up to 4GB system memory
• Supports Dynamic mode to optimize system performance
• Synchronous operation with processor system bus
- PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400)
with 800MHz FSB CPU (supports PAT mode). DDR333
will run at 320MHz memory frequency when used with
800MHz FSB CPU.
Chapter 1 - Introduction