User`s manual

75
3
BIOS Setup
3.1.5.10 Keyboard/Mouse Power On
This field allows you to use the PS/2 keyboard or PS/2 mouse to
power-on the system.
Disabled Default setting. Uses the power button to power
on the system.
Password When this option is selected, set the password
you would like to use to power-on the system in
the “KB Power On Password” field.
Hot Key When this option is selected, select the function
key you would like to use to power-on the sys-
tem in the “KB Power On Hot Key” field.
Any Key Press any key to power-on the system.
Mouse Left When this option is selected, double-click the left
button of the mouse to power-on the system.
Mouse Right When this option is selected, double-click the
right button of the mouse to power-on the sys-
tem.
Keyboard 98 When this option is selected, press the “wake up”
key of the Windows

98 compatible keyboard to
power-on the system.
3.1.5.11 KB Power On Password
Move the cursor to this field and press <Enter>. Enter your pass-
word. You can enter up to 5 characters. Type in exactly the same
password to confirm, then press <Enter>.
The power button will not function once a keyboard password
has been set in this field. You must type the correct password to
power-on the system. If you forgot the password, power-off the
system and remove the battery. Wait for a few seconds and in-
stall it back before powering-on the system.
3.1.5.12 KB Power On Hot Key
This field is used to select a function key that you would like to
use to power-on the system.