User`s manual

BIOS Setup

3.1.2.2 CPU L1 Cache & CPU L2 Cache

These fields speed up the memory access.

3.1.2.3 Quick Power On Self Test

This field speeds up Power On Self Test (POST) whenever the

system is powered on. The BIOS will shorten or skip some check

items during POST. To attain the shortest POST time, select “Ena-

bled”.

3.1.2.4 S-ATA or SCSI Card Boot

This field is used to select the RAID device you want to boot.

S-ATA The drive connected to the SATA connector.

SCSI Card The drive connected to the SCSI add-in card that

is installed in a PCI slot.

If only one type of interface is connected with RAID device(s),

you don’t need to particularly select an option in this field be-

cause the system will automatically detect for the existing drive.

3.1.2.5 First Boot Device, Second Boot Device, Third Boot Device

and Boot Other Device

Select the drive to boot first, second and third in the “First Boot

Device” “Second Boot Device” and “Third Boot Device” fields

respectively. The BIOS will boot the operating system according

to the sequence of the drive selected. Set “Boot Other Device”

to Enabled if you wish to boot from another device.

3.1.2.6 Swap Floppy Drive

When this field is enabled and the system is booting from the

floppy drive, the system will boot from drive B instead of drive A.

When this field is disabled and the system is booting from the

floppy drive, the system will boot from drive A. You must have

two floppy drives to use this function.