User`s manual

Hardware Installation

4. After powering-on the system, press <Del> to enter the main

menu of the BIOS.

5. Select the Genie BIOS Setting submenu and press <Enter>.

6. Set the “CPU Clock Setting” or “CPU Ratio” field to its de-

fault setting or an appropriate bus clock or frequency ratio.

Refer to the Genie BIOS Setting section in chapter 3 for

more information.

7. Press <Esc> to return to the main menu of the BIOS setup

utility. Select “Save & Exit Setup” and press <Enter>.

8. Type <Y> and press <Enter>.