User`s manual

Introduction

1.1.3 Intelligence

CPU Temperature Protection

The CPU Temperature Protection function has the capability of

monitoring the CPU’s temperature during system boot-up. To pre-

vent CPU overheat and damage, the system will automatically

shutdown once it has detected that the CPU’s temperature ex-

ceeded the temperature limit pre-defined by the system.

Overvoltage

The Overvoltage function allows you to manually adjust to a

higher core voltage that is supplied to the CPU, AGP, DRAM and/

or chipset. Although this function is supported, we do not recom-

mend that you use a higher voltage because unstable current

may be supplied to the system board causing damage.

Overclocking

The Overclocking function allows you to adjust the CPU and

DRAM clock. However, overclocking may result to the CPU’s or

system’s instability and are not guaranteed to provide better sys-

tem performance.

Dual Function Power Button

Depending on the setting in the “Soft-Off By PBTN” field of the

Power Management Setup, this switch will allow the system to enter

the Soft-Off or Suspend mode.

Wake-On-Ring

This feature allows the system that is in the Suspend mode or Soft

Power Off mode to wake-up/power-on to respond to calls coming

from an external modem or respond to calls from a modem PCI

card that uses the PCI PME (Power Management Event) signal to

remotely wake up the PC.

Important:

If you are using a modem add-in card, the 5VSB power source

of your power supply must support a minimum of

≥

720mA.