User`s manual

101
4
Supported Software
4.2.3 Silicon Image RAID Drivers
If the Serial ATA drives will be configured as RAID, you must
install the Silicon Image RAID drivers.
1. On the left side of the autorun screen, click the “TOOLS”
icon.
2. Click “Silicon Image RAID Drivers” on the main menu. A
“readme” screen which contains the RAID drivers installation
instructions will appear.
The installation procedure will lead you to install the driver
from a diskette. The diskette is included in the system board
package.
To install the RAID drivers:
1. Insert the “Silicon Image Sil3114 RAID Drivers” diskette.
2. Follow the installation instructions shown on the screen.
3. Reboot the system for the driver to take effect.
Note:
Refer to the Silicon Image RAID User’s Manual for more infor-
mation about the RAID drivers. The manual is included in the
CD.