User`s manual

100
4
Supported Software
4.2.2 LAN Drivers
If you are using the LAN 2 port which is controlled by the
Realtek RTL8110S chip, you must install the LAN drivers. The
LAN drivers support autorun for the following operating systems:
Windows

98 SE, Windows

ME, Windows

2000 and Windows

XP.
To install the driver, please follow the steps below.
1. On the left side of the autorun screen, click the “NETWORK”
icon.
2. Click “LAN Drivers” on the main menu. The following screen
will appear.
3. Follow the prompts on the screen to complete installation.
4. Reboot the system for the driver to take effect.
The LAN driver for Windows NT

4.0 does not support
“Autorun”. Once the Windows NT

4.0 system has detected the
Realtek RTL8110S Gigabit LAN PCI controller, it will prompt you
to install the driver. The driver is in the “RTL_GLAN\WINNT4”
directory of the CD.