User`s manual

Introduction

Rear Panel I/O

Internal I/O

Power Management

Hardware Monitor

PCB

• 1 mini-DIN-6 PS/2 mouse port

• 1 mini-DIN-6 PS/2 keyboard port

• 1 optical S/PDIF-out port

• 1 coaxial RCA S/PDIF-out port

• 6 USB 2.0/1.1 ports

• 1 RJ45 LAN port

• Center/subwoofer, rear R/L and side R/L jacks

• Line-in, line-out (front R/L) and mic-in jacks

• 3 connectors for 6 additional external USB 2.0 ports

• 1 connector for an external COM port

• 1 front audio connector for line-out and mic-in jacks

• 1 CD-in internal audio connector

• 1 connector for IrDA interface

• 6 Serial ATA ports (LP DK P35-T2R / LP DK P35-T2RS)

4 Serial ATA ports (LP DK P35-T2)

• 1 40-pin IDE connector

• 1 floppy connector

• 1 24-pin ATX power connector

• 1 8-pin 12V power connector

• 1 4-pin 5V/12V power connector (FDD type)

• 1 front panel connector

• 3 fan connectors

• EZ touch switches (power switch and reset switch)

• ACPI and OS Directed Power Management

• ACPI STR (Suspend to RAM) function

• Wake-On-PS/2 Keyboard/Mouse

• Wake-On-USB Keyboard/Mouse

• Wake-On-LAN and Wake-On-Ring

• RTC timer to power-on the system

• AC power failure recovery

• Monitors CPU/system/Northbridge temperature and overheat

alarm

• Monitors Vcore/Vdimm/Vnb/VCC5/12V/V5sb/Vbat voltages

• Monitors the speed of the cooling fans

• CPU Overheat Protection function monitors CPU temperature

and fan during system boot-up - automatic shutdown upon sys-

tem overheat

• 4 layers, ATX form factor

• 24.5cm (9.64") x 30.5cm (12")