User`s manual

BIOS Setup

3.1.7.3 Current System Temperature, Current CPU Temperature, Cur-

rent Chassis Fan Speed, Current CPU Fan Speed and Current

Second Fan Speed

These fields show the internal temperature of the system, current

temperature of the CPU and the current fan speed of the chassis,

CPU and second fans in RPM (Revolutions Per Minute).

3.1.7.4 CPU (V)

This field shows the voltage of the processor.

3.1.7.5 +1.5V, +3.3V, +5V, +12V, -12V, VBAT (V) and 5VSB (V)

These fields show the output voltage of the power supply.

3.1.7.6 Shutdown Temperature

You can prevent the system from overheating by selecting a tem-

perature in this field. If the system detected that its temperature

exceeded the one set in this field, it will automatically shutdown.

This function will work only when you enable this function in the

Hardware Monitor utility.

Note:

The onboard hardware monitor function is capable of detecting

“system health” conditions but if you want a warning message

to pop-up or a warning alarm to sound when an abnormal

condition occurs, you must install the Hardware Monitor utility.

This utility is included in the CD that came with the system

board. Refer to the Hardware Monitor section in chapter 4 for

more information.