User`s manual

BIOS Setup

3.1.2.18 Security Option

This field determines when the system will prompt for the pass-

word - everytime the system boots or only when you enter the

BIOS setup. Set the password in the Set Supervisor/User Pass-

word submenu.

System The system will not boot and access to Setup will be

denied unless the correct password is entered at the

prompt.

Setup The system will boot, but access to Setup will be de-

nied unless the correct password is entered at the

prompt.

3.1.2.19 APIC Mode

Leave this field in its default setting.

3.1.2.20 MPS Version Control for OS

This field is used to select the MPS version that the system

board is using.

3.1.2.21 OS Select for DRAM > 64MB

Select the “OS2” option only if the system that is running an

OS/2 operating system has greater than 64MB RAM.

3.1.2.22 HDD S.M.A.R.T. Capability

The system board supports SMART (Self-Monitoring, Analysis and

Reporting Technology) hard drives. SMART is a reliability predic-

tion technology for ATA/IDE and SCSI drives. The drive will pro-

vide sufficient notice to the system or user to backup data prior

to the drive’s failure. The default is Disabled. If you are using hard

drives that support S.M.A.R.T., set this field to Enabled. SMART is

supported in ATA/33 or later hard drives.

3.1.2.23 Report No FDD For WIN 95

The options are Yes and No.