User`s manual

90
3
BIOS Setup
PC Health Status
Current CPU Fan Speed to V3.3V
These fields will show the fan speed, temperature and output voltage
of the monitored devices or components.
Fan1 Speed Control Segment
This field is used to select the CPU temperature that will allow the
CPU fan to rotate at full speed. The system will automatically adjust
the CPU fan’s speed according to the temperature.
Fan2 Speed Control Segment
This field is used to select the system’s temperature that will allow
the system fan to rotate at full speed. The system will automatically
adjust the system fan’s speed according to the temperature.
Note:
The onboard hardware monitor function is capable of detecting
“system health” conditions but if you want a warning message
to pop-up or a warning alarm to sound when an abnormal
condition occurs, you must install the Hardware Monitor utility.
This utility is included in the CD that came with the system
board. Refer to the Hardware Monitor section in chapter 4 for
more information.
The settings on the screen are for reference only. Your version may not be identical
to this one.