User`s manual

77
3
BIOS Setup
Onboard Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be
identical to this one.
USB Controller
Enabled Enables the onboard USB.
Disabled Disables the onboard USB.
USB 2.0 Controller
If you are using a USB 2.0 device, this field must be set to Enabled.
Secondary IDE 1 serves as Secondary Master and Sec-
ondary Slave channel. SATA 1 and SATA 3
serve as Primary Master and Primary Slave
channel. SATA 2 and SATA 4 are disabled.
SATA Port
If the “PATA IDE Mode” field is set to Primary, this field will
show “P1, P3 is Secondary”; meaning SATA 2 and SATA 4 are
Secondary.
If the “PATA IDE Mode” field is set to Secondary, this field will
show “P0, P2 is Primary”; meaning SATA 1 and SATA 3 are
Primary.