User`s manual

Introduction

This feature allows the system that is in the

Suspend mode or Soft Power Off mode to

wake-up/power-on to respond to calls coming from an external mo-

dem or respond to calls from a modem PCI card that uses the PCI

PME (Power Management Event) signal to remotely wake up the

PC.

Important:

If you are using a modem add-in card, the 5VSB power source

of your power supply must support a minimum of

≥

720mA.

This function allows you to use the PS/2 key-

board or PS/2 mouse to power-on the sys-

tem.

Important:

The 5VSB power source of your power supply must support

≥

720mA.

This function allows you to use a USB key-

board or USB mouse to wake up a system

from the S3 (STR - Suspend To RAM) state.

Important:

If you are using the Wake-On-USB Keyboard/Mouse function for

2 USB ports, the 5VSB power source of your power supply

must support

≥

1.5A. For 3 or more USB ports, the 5VSB

power source of your power supply must support

≥

2A.

The RTC installed on the system board allows your

system to automatically power-on on the set date

and time.

When power returns after an AC power fail-

ure, you may choose to either power-on the

system manually or let the system power-on

automatically.

wake-on-ring

wake-on-PS/2

wake-on-USB

rtc timer

Power failure

recovery