User`s manual

1
Introduction
9
Graphics
Audio
LAN
IDE
Serial ATA
AGP
Rear I/O
• Graphics memory
- Shares 1MB/8MB/16MB of the system memory in DOS mode
- Uses Dynamic Video Memory Technology (DVMT) in
Windows mode
• Graphics controller
- Core frequency of 266MHz
- 350MHz integrated 24-bit RAMDAC
- Analog display up to 2048x1536 @ 60Hz refresh
- 3D setup and render engine - Discrete, Triangles, Strips and fans
- Per pixel perspective corrected texture mapping
- Software DVD at 30fps, full screen
• 2D graphics features
- Optimized 256-bit BLT engine
- 32-bit alpha blended cursor
- Programmable 3-color transparent cursor
• 3D graphics features
- Maximum 3D resolution: 1600x1200x32 @ 85Hz
- Flat and Gouraud shading
- 16- and 24-bit Z-buffering and 16- and 24-bit W-buffering
- Vertex and programmable pixel fogging and atmospheric
effects
- Double and triple render buffer
• Realtek audio CODEC
• 16-bit stereo full-duplex codec with 48KHz sampling rate
• High quality differential CD input
• True stereo line level outputs
• S/PDIF-out interface
• 6-channel audio output
• Two Realtek RTL8110SC PCI Gigabit LAN controllers
• Supports 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant
• Supports up to UltraDMA 100Mbps hard drives
• PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)
• Supports two SATA (Serial ATA) interfaces which are compliant
with SATA 1.0 specification (1.5Gbps interface)
• Supports AGP 3.0 and AGP 2.0 spec.
• AGP 8x data rate provides a theoretical maximum bandwidth of
2.13GB/sec.
• Supports 1.5V AGP 4x with up to 1066MB/sec. bandwidth for
3D graphics applications (3.3V AGP card is not supported)
• 1 mini-DIN-6 PS/2 mouse port
• 1 mini-DIN-6 PS/2 keyboard port
• 1 DB-25 parallel port
• 1 DB-9 serial port
• 1 DB-15 VGA port
• 2 RJ45 LAN ports
• 4 USB 2.0/1.1 ports
• Mic-in, line-in and line-out