User`s manual
Table Of Contents
- About this Manual
- Warranty
- Static Electricity Precautions
- Safety Measures
- About the Package
- Before Using the System Board
- Chapter 1 - Introduction
- Chapter 2 - Hardware Installation
- Chapter 3 - BIOS Setup
- Chapter 4 - Supported Software
- Appendix A - Enabling Hyper-Threading Technology
- Appendix B - Watchdog Timer
- Appendix C - System Error Message
- Appendix D - Troubleshooting

Introduction
1
8
• LGA 775 socket for:
- Intel
®
Pentium
®
D
- Intel
®
Pentium
®
4
- Intel
®
Celeron D
• Supports Intel Enhanced Memory 64 Technology (EMT64T)
• Supports Enhanced Intel SpeedStep Technology (EIST)
• Supports Intel Hyper-Threading Technology
• Supports 800/533MHz FSB
• Intel
®
chipset
- Intel
®
865G Graphics Memory Controller Hub (GMCH)
- Intel
®
82801EB I/O Controller Hub (ICH5)
• Supports two channel (64-bit wide) memory interface
- Each channel supports 2 DIMM sockets
• Supports up to 4GB system memory
• Synchronous operation with processor system bus
- PC2700/PC3200 (DDR333/DDR400) with 800MHz FSB
CPU. DDR333 will run at 320MHz memory frequency when
used with 800MHz FSB CPU.
- PC2700 (DDR333) with 533MHz FSB CPU
• Supports non-ECC (x64) unbuffered DIMM using 128Mb,
256Mb or 512Mb
• Award BIOS
• 4Mbit flash memory
• Supports ACPI specification and OS Directed Power Manage-
ment
• Supports ACPI STR (Suspend to RAM) function
• Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse
- Wake-On-USB Keyboard/Mouse
- Wake-On-Ring (external modem)
- Wake-On-LAN
- RTC timer to power-on the system
• System power management supported
• CPU stopped clock control
• Microsoft
®
/Intel
®
APM 1.2 compliant
• Soft Power suppor ted - ACPI v1.0a specification
• AC power failure recovery
• Monitors CPU/system temperature
• Monitors CPU/1.5V/3.3V/5V/+12V voltages
• Monitors CPU/system fan speed
• Read back capability that displays temperature, voltage and fan
speed
• Supports Watchdog Timer function
Processor
Chipset
System Memory
BIOS
Energy Efficient
Design
Damage Free
Intelligence
Chapter 1 - Introduction
Specifications