User`s manual

BIOS Setup

PnP/PCI Configurations

This section shows how to configure the PCI bus system. It covers

some very technical items and it is strongly recommended that only

experienced users should make any changes to the default settings.

Init Display First

Onboard When the system boots, it will first initialize the

onboard VGA.

PCI Slot When the system boots, it will first initialize PCI.

Reset Configuration Data

Enabled The BIOS will reset the Extended System Configuration

Data (ESCD) once automatically. It will then recreate a

new set of configuration data.

Disabled The BIOS will not reset the configuration data.

Resources Controlled By

The Award Plug and Play BIOS has the capability to automatically

configure all of the boot and Plug and Play compatible devices.

Auto The system will automatically detect the settings for you.

Manual Choose the specific IRQ in the “IRQ Resources” field

respectively.

The settings on the screen are for reference only. Your version may not be

identical to this one.

Phoenix - AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

Item Help

Menu Level

↑↓→←: Move Enter: Select F1: General Help+/-/PU/PD: Value F10: Save ESC: Exit

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Init Display First

Reset Configuration Data

Resources Controlled By

x IRQ Resources

PCI Latency Timer (CLK)

Onboard

Disabled

Auto(ESCD)

Press Enter