User`s manual

72
3
BIOS Setup
Power On Function
This field allows you to use the keyboard or PS/2 mouse to power-
on the system.
MS Move & Click Move and click the PS/2 mouse to wake up
the system.
Any Key Press any key to power-on the system.
Button only Default setting. Uses the power button to
power-on the system.
Onboard FDC Controller
Enabled Enables the onboard floppy disk controller.
Disabled Disables the onboard floppy disk controller.
Onboard Serial Port 1 and Onboard Serial Port 2
Auto The system will automatically select an I/O address for
the onboard serial port 1 and serial port 2.
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 Allows you to manu-
ally select an I/O address for the onboard serial port 1
and serial port 2.
Disabled Disables the onboard serial port 1 and/or serial port 2.
UART Mode Select
The settings on the screen are for reference only. Your version may not be
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
Super IO Device
Item Help
Menu Level
X
↑↓→←: Move Enter: Select F1: General Help+/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
KBC input clock
POWER ON Function
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
x UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
8 MHz
BUTTON ONLY
Enabled
3F8/IRQ4
Normal
Half
378/IRQ7
SPP
3
POWER ON Function
MS Move&Click
Any KEY
BUTTON ONLY
. . . . . [ ]
. . . . . [ ]
. . . . . [ ]
↑↓: Move ENTER: Accept ESC: Abort