User`s manual

40
2
Hardware Installation
The front audio is disabled.
The rear audio is enabled.
The front audio is enabled.
The rear audio is disabled.
Pins 5-6 and 9-10 short
(default)
Pins 5-6 and 9-10 open
Driver Installation
Install the audio driver. An audio software application program will at
the same time install in your system. Refer to chapter 4 for more
information.
Front Audio
The front audio connector allows you to connect to the line-out and
mic-in jacks that are at the front panel of your system. Using this
connector will disable the rear audio’s line-out and mic-in functions.
Remove the jumper caps from pins 5-6 and pins 9-10 of the front
audio connector prior to connecting the front audio cable connector.
Make sure pin 1 of the cable connector is aligned with pin 1 of the
front audio connector. If you are not using this connector, make sure
to replace the jumper caps back to their original pin locations.
2-channel
Line-in
Line-out
Mic-in
4-channel
Line-in
Front R/L
Rear R/L
6-channel
Center/Subwoofer
Front R/L
Rear R/L
Light Blue
Lime
Pink