User`s manual

COM Express Board

PCI/Onchip VGA Control

Onchip VGA Select this option if you want the system to boot the

onboard VGA.

PCI Port Select this option if you want the system to boot the

graphics PCI add-in card.

On-Chip Frame Buffer Size

This field is used to select the onboard VGA’s frame buffer size that

is shared from the system memory.

DVMT Mode

The options are DVMT, Fixed and Both.

DVMT/Fixed Memory Size

This field is used to select the graphics memory size used by DVMT/

Fixed mode.

Boot Display

This field is used to select the type of display to use when the

system boots.

CRT Select this option if you want the system to boot

the CRT display.

LFP Select this option if you want the system to boot

the LCD flat panel display.

CRT+LFP Select this option if you want the system to boot

both the CRT and LCD flat panel display.

Panel Scaling

This options are Auto, On and Off.

Panel Number

This field is used to select the type of panel that you are using.