User`s manual

Introduction

The Marvell 88E8053 Gigabit LAN chip supports

up to 1Gbps data transmission.

The system board is equipped with an IrDA connec-

tor for wireless connectivity between your computer

and peripheral devices. The IRDA (Infrared Data Association) specifi-

cation supports data transfers of 115K baud at a distance of 1

meter.

The system board supports USB 2.0 and USB 1.1

ports. USB 1.1 supports 12Mb/second bandwidth

while USB 2.0 supports 480Mb/second bandwidth providing a

marked improvement in device transfer speeds between your com-

puter and a wide range of simultaneously accessible external Plug

and Play peripherals.

This feature allows the system that is in the

Suspend mode or Soft Power Off mode to

wake-up/power-on to respond to calls coming from an external mo-

dem or respond to calls from a modem PCI card that uses the PCI

PME (Power Management Event) signal to remotely wake up the

PC.

Important:

The 5V_standby power source of your power supply must sup-

port

≥

720mA.

This feature allows the network to remotely

wake up a Soft Power Down (Soft-Off) PC.

It is supported via the onboard LAN port or via a PCI LAN card

that uses the PCI PME (Power Management Event) signal. However,

if your system is in the Suspend mode, you can power-on the system

only through an IRQ or DMA interrupt.

Important:

The 5V_standby power source of your power supply must sup-

port

≥

720mA.

This function allows you to use the PS/2 key-

board or PS/2 mouse to power-on the sys-

tem.

USB

wake-on-lan

wake-on-ring

wake-on-PS/2

irda

gigabit lan