User`s manual

Green PCI/VL-B/ISA System Board
2-9 u Installation Overview
Jumper J18
PS/2 Mouse
The G586VPA package includes one DB-25S hole cover
containing the PS/2 mouse port. If you set Jumper J18
to Enabled, make sure you connect the PS/2 mouse port
to Connector CN2.
2-3 On: PS/2 Mouse
Disabled (Default)
321
1-2 On: PS/2 Mouse
Enabled
321
Jumper J19
Flash EPROM Programming Voltage
Jumper J19 should be set to match the voltage of the
Flash EPROM installed on the G586VPA system board.
See page 2-7 for the location of the Flash EPROM.
321
1-2 On: +12V
(Default)
321
2-3 On: +5V