User`s manual

G586VPB
Installation Overview u 2-21
To install an upgrade CPU, do the following.
1. Make sure the handle on the side of the ZIF socket
is up. To raise the handle, push down, pull it out to
the side a little and raise it as far as it will go. The
top plate will slide back. Do not use screw drivers or
other tools to open the socket, or damage may occur
to the system or socket. It may be necessary to
initially apply a small amount of sideways force to
free the handle from its retaining “tab.” Once clear of
the “tab,” the handle will open relatively easily.
Zero Insertion Force (ZIF) Socket