User`s manual

G586SP/G586SP AIO

Jumper JP10, JP11: Onboard Cache Memory

Jumper JP15: Onboard Cache SRAM Type

The setting of JP15 is determined by the manufacturer based on

the types of SRAM installed on the board and cannot be changed

by the user.

JP14

Burst/Pipelined Burst (Default) Pin 2-3 On

Asynchronous Pin 1-2 On

Note: If you use cache modules, you must first take off the onboard

cache SRAM and Tag SRAM.

Jumper JP14: Cache Module Type

JP13

5V Flash EPROM (29F010/29EE010)

Pin 1-2 On

12V Flash EPROM (28F010)

Pin 2-3 On

Jumper JP13: Flash EPROM Type

Cache Memory

Size

256KB

(Default)

512KB 1MB

Data SRAM 32KBx8x8 64KBx8x8 128KBx8x8

TAG SRAM 8KBx8x1 (16/32)KBx8x8 32KBx8x1

Cacheable

Range*

8 tag bits 64MB 128MB 256MB

7 tag bits,

1 dirty bit

32MB 64MB 1285MB

Jumper Setting

JP10 1-2 On 1-2 On 2-3 On

JP11 1-2 On 2-3 On 2-3 On

* This setting can be changed by selecting the “L2(WB) Tag Bit

Length” option in the “ Chipset Features Setup” of the “BIOS

Features Setup”.