User`s manual

G586SP/G586SP AIO
12
Jumper JP6: PCI Bus Clock
JP6
CPU Bus Clock/2 (Default)
Off
32MHz
On
Jumper JP7, JP8: CPU Bus (External) Speed
The CPU bus (external) speed is the clock speed of a Pentium
CPU. JP7 and JP8 should be set according to the CPU’s exter-
nal speed.
JP9
External
(Default)
Off
Internal
On
CPU External Speed
JP7
JP8
50MHz
On
On
60MHz (Default)
On
Off
66MHz
Off
On
Jumper JP9: Internal/External Battery Selection
The system board comes with an internal lithium battery. The
default setting is on the “Off” position for battery conservation
during shipping the board. If you wish to use the internal lithium
battery, set pin 1-2 to the “On” position. Leave the jumper on
the “Off” position if you wish to use an external lithium battery
(3.6V).