User`s manual

G586SP/G586SP AIO
9
Bank 1
Bank 0
SIMM 1
SIMM 2
SIMM 1
SIMM 2
Single-Sided
Double-Sided
Double-Sided
Single-Sided
Double-Sided
Double-Sided
Single-Sided
Double-Sided
64-Bit Memory
32-Bit Memory
Single-Sided
Single-Sided
Single-Sided
Double-Sided
Double-Sided
Double-Sided
Single-Sided
Double-Sided
Double-Sided
Single-Sided
Single-Sided
Single-Sided
Double-Sided
Single-Sided
Double-Sided
Single-Sided
Single-Sided
Double-Sided
Memory Installation
The system board supports 2MB to 256MB of memory using
72-pin SIMMs (Single In-line Memory Module) with the
following two types of memory and sizes: (1) Single-sided
SIMMs: 1MB, 4MB, 16MB, and 64MB; (2) Double-sided
SIMMs: 2MB, 8MB, and 32MB.
The SIM sockets are divided into two banks on the system
board. Each bank consists of 2 SIMM sockets. The board
uses x32 or x36, 60 0r 70ns SIMMs. You will need 2 or 4
pieces of SIM modules, depending on the amount of memory
you intend to install.
The following table summarizes the bank locations and
possible memory configurations: