User`s manual

PCI/ISA System Board
64
User
This type is user definable and allows you to enter the
specifications yourself directly from the keyboard. Six
categories of information are required: Size, Cylinders,
Heads, Precomp, LandZone and Sectors. This informa-
tion should be provided by your hard disk vendor or
system manufacturer. However, we recommend you use
the “IDE HDD Auto Detection” which provides a more
efficient way to setup your hard drive.
46 Predefined Drive Specifications
The tables on pages 93 and 94 give complete listings of
the available drive types. Any given hard drive must be
set to one specific drive type number. Please refer to
your hard disk documentation for the appropriate type
number.
None
Select <None> and press <Enter> if a hard drive is not
installed.
Drive A and Drive B
These options are used to select the type of floppy disk
drives installed in your system. If neither drive is
present, select “None”. Make sure you choose the
correct drive type; otherwise, your system might format
the device improperly.