User`s manual

PCI Configuration Setup

Use the arrow keys to highlight “PCI Configuration Setup” and press

<Enter>; a screen similar to the one below will appear.

The PCI Configuration Setup allows you to assign INT A, B, C or D to

the hard drives installed in your system. Each INT may then be as-

signed an IRQ value.

Load BIOS Defaults

The “Load BIOS Defaults” option loads the troubleshooting default val-

ues permanently stored in the ROM chips. These settings are not opti-

mal and turn off all high performance features. You should use these

values only if you have hardware problems. Highlight this option on the

main menu and press <Enter>. The message below will appear.

Load BIOS Defaults (Y/N)? N

If you want to proceed, press <Y> and the default settings will be

loaded.

Load Setup Defaults

The “Load Setup Defaults” option loads optimized settings from the

BIOS ROM. Use the Setup default values as standard values for your

system.