User`s manual

27
Jumper Settings for Password Clear
Jumper JP3
Password Clear
If you set a password in the “Password Setting” option and forget your
password, power off your system and set Jumper JP3 to On to clear
the password stored in your CMOS. Now power on your system. After
your system has detected the floppy or hard drive, turn it off again and
set JP3 to Off.
Off: Normal
(Default)
On: Password Clear
1
3
2
1
3
2
2-3 On: Mono
1-2 On: Color
(Default)
Jumper Settings for Display
Jumper JP4
Display Type Select
Jumper JP4 sets the display adapter to color or mono. This jumper
must match the type of display adapter installed. If you change your
video adapter, make sure this jumper is changed accordingly.