User`s manual

Hardware Installation

I/O Connectors

Game/MIDI Port

The system board is equipped with a 15-pin connector at loca-

tion J4 for connecting an external game/MIDI port. The game/MIDI

port may be mounted on a card-edge bracket. Install the card-edge

bracket to the system chassis then connect the game/MIDI port

cable to connector J4. Make sure the colored stripe on the ribbon

cable is aligned with pin 1 of connector J4.

BIOS Setting

Configure the game port in the Integrated Peripherals submenu

(“Onboard Super I/O Device” section) of the BIOS. Refer to chapter

3 for more information.