User`s manual

34
2
Hardware Installation
COM 1 COM 2
Serial Ports
W
The system board is equipped with two onboard serial ports at
locations CN4 (COM 1) and CN11 (COM 2). These serial ports
are RS-232 asynchronous communication ports with 16C550A-
compatible UARTs that can be used with modems, serial printers,
remote display terminals, and other serial devices.
BIOS Setting
Configure the serial ports in the Integrated Peripherals submenu
(“Onboard Super I/O Device” section) of the BIOS. Refer to chapter
3 for more information.