User`s manual

Hardware Installation

PS/2 Mouse and PS/2 Keyboard Ports

The system board is equipped with an onboard PS/2 mouse

(Green) and PS/2 keyboard (Purple) ports - both at location CN1

of the system board. The PS/2 mouse port uses IRQ12. If a mouse

is not connected to this port, the system will reserve IRQ12 for

other expansion cards.

Warning:

Make sure to turn off your computer prior to connecting or

disconnecting a mouse or keyboard. Failure to do so may

damage the system board.

Wake-On-PS/2 Keyboard/Mouse

The Wake-On-PS/2 Keyboard/Mouse function allows you to use the

PS/2 keyboard or PS/2 mouse to power-on the system. To use this

function:

• BIOS Setting:

Configure the PS/2 wake up function in the Integrated Peripherals

submenu (“Onboard Super I/O Device” section) of the BIOS.

Refer to chapter 3 for more information.

PS/2 Mouse

PS/2 Keyboard