User`s manual
30
2
Hardware Installation
JP10 is used to set the CompactFlash
TM
socket to Master or Slave
mode.
CompactFlash
TM
and IDE 2 share the same channel. The mode of
the hard drive connected to the IDE 2 connector must differ from
the one selected for CompactFlash
TM
. In other words, if
CompactFlash
TM
is set to Slave mode, then IDE 2’s hard drive must
be set to Master mode and vice versa. Under such circumstance,
IDE 2 can only support one hard drive.
CompactFlash Card Setting
X
2-3 On:
Master
JP10
1-2 On: Slave
(default)
312 312