User`s manual

66
3
BIOS Setup
Hardware Health Configuration
This section is used to congure the hardware monitor function.
Chassis Intrusion
(Case Open) function
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← Select Screen
↑↓ Select Item
+
-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Hardware Health Conguration
Case Open Detection
System Temperature
CPU Temperature
North Bridge Temperature
SYSFAN Speed
Current CPU FAN
2nd FAN Speed
Vcore
+3.3 (V)
+5 (V)
+1.1 (V)
+1.5 (V)
+12 (V)
VBAT (V)
Smart Fan
CPUFAN TargetTemp Value
CPUFAN Tolerance Value
CPUFAN Stop Value
CPUFAN StopTime Value
Advanced
[Disabled]
:28
o
C/82
o
F
:28
o
C/82
o
F
:35
o
C/95
o
F
:N/A
:2860 RPM
:N/A
:1.240 V
:3.408 V
:5.120 V
:1.120 V
:1.512 V
:12.376 V
:3.216 V
[Enabled]
[055]
[03]
[150]
[010]
Case Open Detection
Set this eld to Enabled to allow the system to alert you of a chassis intru-
sion event.
Smart Fan
The CPU speed will rotate according to the CPU’s temperature. The higher the
temperature, the faster the speed of rotation. The options are enabled and
disabled.
CPUFAN TargetTemp Value
By default, the CPU fan is set to run at full speed. If you want to reduce the
fan’s noise, you can slow down the fan’s speed by selecting an option in this
eld. The options are from 0 to 127. Do not slow down the speed by lower
than 40% to prevent CPU overheat.
CPUFAN Tolerance Value
This eld is used to select the tolerance value of the CPU’s temperature. The
options are from 0 to 15. If you selected 3, it allows the temperature to run
3 degrees higher or lower. The CPU fan will smartly adjust it’s speed in ac-
cordance to the temperature.
CPUFAN Stop Value
Used to enter the stop value of the CPU fan. The options are from 0 to 255.

