User`s manual

65
3
BIOS Setup
PWRON After PWR-Fail
Off
When power returns after an AC power failure, the system’s power is off. You
must press the Power button to power-on the system.
On
When power returns after an AC power failure, the system will automatically
power-on.
Former-Sts
When power returns after an AC power failure, the system will return to the
state where you left off before power failure occurs. If the system’s power
is off when AC power failure occurs, it will remain off when power returns.
If the system’s power is on when AC power failure occurs, the system will
power-on when power returns.
Serial Port1 Address to Serial Port8 Address
3F8, 2F8, 3E8, 2E8, 2F0, 2E0, 2D8, 2D0
Allows you to manually select an I/O address for the onboard serial port 1 to
serial port 8.
Disabled
Disables the onboard serial port 1 to serial port 8.
Serial Port1 IRQ to Serial Port8 IRQ
These elds are used to select an IRQ for the onboard serial port 1 to serial
port 8.