User`s manual

60
3
BIOS Setup
IDE Configuration
This section is used to congure the IDE drives.
Disabled
Compatible
Enhanced
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← Select Screen
↑↓ Select Item
+
-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
IDE Conguration
ATA/IDE Conguration
Congure SATA Channels
Port0 SATA AHCI Speed: GEN 1 (1.5 Gb/sec)
Port3 SATA AHCI Speed: GEN 1 (1.5 Gb/sec)

Primary IDE Master

Primary IDE Slave

Secondary IDE Master

Secondary IDE Slave

Third IDE Master

Third IDE Slave
Advanced
[Enhanced]
[Before PATA]
: [ATAPI CDROM]
: [Not Detected]
: [Not Detected]
: [Hard Disk]
: [Not Detected]
: [Not Detected]
ATA/IDE Conguration
These elds are used to congure the IDE device mode. The options are
Disabled, Compatible and Enhanced.
Compatible
Legacy IDE channels will appear allowing you to congure the devices. The
options are “SATA Only”, “PATA PRI, SATA Sec”, “SATA Pri, PATA Sec”, and
“PATA Only”.
Enhanced
”Congure SATA Channels” will appear allowing you to congure the devices.
Congure SATA Channels
Before PATA
The storage device under SATA channels will appear before the IDE PATA de-
vice.
Beind PATA
The storage device under SATA channels will appear after the IDE PATA de-
vice.
Options