User`s manual

Introduction

Features

DDR3

DDR3 delivers increased system bandwidth and improved performance. It offers

peak data transfer rate of up to 17 Gb/s bandwidth. The advantages of DDR3

are its higher bandwidth and its increase in performance at a lower power than

DDR2.

Graphics

The Intel northbridge chip comes integrated with the Intel GraphicsMedia Accel-

eratorX4500 delivering3D,2D and video capabilities. With support forMicrosoft

DirectX 10 and OpenGL 2.1, Intel GMA X4500 delivers excellent video and 3D

graphics with outstanding graphics responsiveness. These enhancements deliver

the performance and compatibility needed for today’s and tomorrow’s business

applications.

Audio

The Realtek ALC262 audio codec provides 2-channel High Definition audio output.

Serial ATA

Serial ATA is a storage interface that is compliant with SATA 1.0a specification.

With speed of up to 3Gbps, it improves hard drive performance faster than the

standard parallel ATA whose data transfer rate is 100MB/s.

Gigabit LAN

The Realtek RTL8111DL PCI Express Ethernet Gigabit controller supports up to

1Gbpsdatatransmission.

USB

The system board supports USB 2.0 and USB 1.1 ports. USB 1.1 supports 12Mb/

second bandwidth while USB 2.0 supports 480Mb/second bandwidth providing a

marked improvement in device transfer speeds between your computer and a

wide range of simultaneously accessible external Plug and Play peripherals.

Wake-On-LAN

This feature allows the network to remotely wake up a Soft Power Down (Soft-

Off) PC. It is supported via the onboard LAN port or via a PCI LAN card that uses

the PCI PME (Power Management Event) signal. However, if your system is in the

Suspend mode, you can power-on the system only through an IRQ or DMA inter-

rupt.

Important:

The 5V_standby power source of your power supply must support

≥720mA.