User`s manual

72
3
BIOS Setup
CPU Smart Fan Temperature
This eld is used to select the temperature at which the CPU fan runs at full
speed. The temperature will vary within the range of the tolerance value selected
in the eld below.
CPU Fan Tolerance Value
This eld is used to select the tolerance value of the CPU’s temperature. The op-
tions are 1, 2, 3, 4 and 5. If you selected 3, it allows the temperature to run 3
degrees higher or lower. The CPU fan will smartly adjust it’s speed in accordance
to the temperature.
Case Open Detection
Set this eld to Enabled to allow the system to alert you of a chassis intrusion
event.