User`s manual

71
3
BIOS Setup
PC Health Status
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
Menu Level 
↑↓→←: Move Enter: Select F1: General Help+/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
 Shutdown Temperature
Current System Temp
Current CPU Temperature
System Fan Speed
CPU Fan Speed
CPU Voltage
DDRIII Voltage
+3.3V
+12V
+5V
VBAT (V)
5VSB (V)
SYS Smart Fan Temperature
System Fan Tolerance Value
CPU Smart Fan Temperature
CPU FAN Tolerance Value
Case Open Detection
60
o
C/140
o
F
32
o
C/89
o
F
0
o
C/32
o
F
0 RPM
4927 RPM
1.24V
1.48V
3.36
12.26V
5.10V
3.00V
5.04V
35
o
C/95
o
F
3
30
o
C/86
o
F
3
Disabled
Shutdown Temperature
You can prevent the system from overheating by selecting a temperature at
which the system will shutdown. If the system detected that its temperature ex-
ceeded the one set in this eld, it will automatically shutdown.
Current System Temp to 5VSB (V)
These elds will show the temperature, fan speed and output voltage of the
monitored devices or components.
SYS Smart FAN Temperature
This eld is used to select the temperature at which the system fan runs at full
speed. The temperature will vary within the range of the tolerance value selected
in the eld below.
System Fan Tolerance Value
This eld is used to select the tolerance value of the system’s temperature. The
options are 1, 2, 3, 4 and 5. If you selected 3, it allows the temperature to run
3 degrees higher or lower. The system fan will smartly adjust it’s speed in accor-
dance to the temperature.
The settings on the screen are for reference only. Your version may not be identical to
this one.