User`s manual

BIOS Setup

Resume By Alarm

Enabled

When Enabled, you can set the date and time you would like the Soft Power

Down (Soft-Off) PC to power-on in the “Date (of Month) Alarm” and “Time

(hh:mm:ss) Alarm” elds. However, if the system is being accessed by in-

coming calls or the network (Resume On Ring/LAN) prior to the date and

time set in these elds, the system will give priority to the incoming calls or

network.

Disabled

Disables the automatic power-on function. (default)

Date (of Month) Alarm

The system will power-on everyday according to the time set in the “Time

(hh:mm:ss) Alarm” eld.

1-31

Select a date you would like the system to power-on. The system will power-

on on the set date, and time set in the “Time (hh:mm:ss) Alarm” eld.

Time (hh:mm:ss) Alarm

This is used to set the time you would like the system to power-on. If you want

the system to power-on everyday as set in the “Date (of Month) Alarm” eld, the

time set in this eld must be later than the time of the RTC set in the Standard

CMOS Features submenu.

HPET Support

This eld is used to enable or disable HPET.

HPET Mode

The options are 32-bit mode and 64-bit mode.