User`s manual

BIOS Setup

Integrated Peripherals

Phoenix - AwardBIOS CMOS Setup Utility

Integrated Peripherals

Item Help

Menu Level 

↑↓→←: Move Enter: Select F1: General Help+/-/PU/PD: Value F10: Save ESC: Exit

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

OnChip IDE Device

Onboard Device

Super IO Device

USB Device Setting

Onboard LAN1 Boot ROM

Onboard LAN2 Boot ROM

Press Enter

Disabled

The settings on the screen are for reference only. Your version may not be identical to

this one.

OnChip IDE Device

Onboard Device

Super I/O Device

USB Device Setting

Onboard LAN1 Boot ROM / Onboard LAN2 Boot ROM

Enable this eld if you wish to use the boot ROM (instead of a disk drive) to

boot-up the system and access the local area network directly.

If you wish to change the boot ROM’s settings, type the <Shift> and <F10> keys

simultaneously when prompted during boot-up. Take note: you will be able to ac-

cess the boot ROM’s program (by typing <Shift> + <F10>) only when this eld

is enabled.

Refer to the following pages for more information on

these submenus.