User`s manual

BIOS Setup

Many disk diagnostic programs which attempt to access the boot

sector table will cause the warning message to appear. If you are

running such a program, we recommend that you first disable this

field.

CPU L1 and L2 Cache

This field is used to speed up the memory access. Enable the exter-

nal cache for better performance.

Quick Power On Self Test

This field speeds up Power On Self Test (POST) after you power on

the system. When Enabled, the BIOS will shorten or skip some check

items during POST.

First Boot Device, Second Boot Device, Third Boot Device and Boot

Other Device

Select the drive to boot first, second and third in the “First Boot

Device” “Second Boot Device” and “Third Boot Device” fields re-

spectively. The BIOS will boot the operating system according to the

sequence of the drive selected. Set “Boot Other Device” to Enabled

if you wish to boot from another device.

Boot Up NumLock Status

This allows you to determine the default state of the numeric

keypad. By default, the system boots up with NumLock on wherein

the function of the numeric keypad is the number keys. When set to

Off, the function of the numeric keypad is the arrow keys.