User`s manual

2
38
Hardware Installation
2.10.10 Second Fan Connector
If you are installing a second fan in the system unit, connect the fans
connector to location J6 on the system board. The system is capable
of monitoring the speed of the second fan but does not control its
fan speed.
2.10.11 VGA Port
The system board can only be used
with an analog video monitor. Connect
the monitors 15-pin D-shell cable
connector to the VGA port (CN10 -
Blue) located at the ATX double deck
ports of the board. If your monitor
supports analog video but does not
have a 15-pin D-shell connector, see
your monitor dealer for the adapter or
optional cable. After you plug the
monitor cable into the VGA port, gently
tighten the cable screws to hold the
connector in place. Some monitors have
a switch that chooses between analog
and TTL (or digital) operation. If your monitor has such a switch, set
it for analog.
Pin
1
2
3
Function
Ground
+12V
Sense