User`s manual

2
Hardware Installation
29
2.8 Jumper Settings for the Systems Beep Message
Systems Beep Message Output Select - Jumper JP8
This jumper is used to select the
speaker from which the systems beep
message will sound. If you want the
systems beep message to come from
the external speaker that is connected
to the line-out jack, set this jumper pins
1 and 2 to On. If you want the systems
beep message to come from the PCs
speaker, set this jumper pins 2 and 3 to
On.
2-3 On:
PCs speaker
(default)
1-2 On:
External speaker
3
2
1
3
2
1