User`s manual

Hardware Installation

2-3 On:

Clear CMOS Data

1-2 On: Normal

(default)

2.5 Jumper Settings for Wake-On-Keyboard/

Wake-On-Mouse

Wake-On-Keyboard/Wake-On-Mouse - Jumper JP5

The Wake-On-Keyboard/Wake-On-

Mouse function allows you to use the

keyboard or PS/2 mouse to power-on

the system. By default, JP5 is disabled. To

use this function, set JP5 to 2-3 On.

Keyboard/Mouse Power On in the

Integrated Peripherals submenu of the

BIOS must be set accordingly. Refer to

chapter 3 for details.

Warning:

1. If JP5 was enabled with a

password set in the KB Power

On Password field, and now you wish to disable the

keyboard password function, make sure to set the

Keyboard/Mouse Power On field to Disabled prior to

setting JP5 to disabled. You will not be able to boot up the

system if you fail to do so.

2. The power button will not function once a keyboard

password has been set in the KB Power On Password

field of the Integrated Peripherals submenu. You must type

the correct password to power-on the system.

7. Press <Esc> to return to the main menu of the BIOS setup

utility. Select Save & Exit Setup and press <Enter>.

8. Type <Y> and press <Enter>.

12 3 123