User`s manual

2
Hardware Installation
21
2. Once the Fastening Latch is engaged, push down firmly the
opposite side of the GPA card. As the GPA card is being
pushed down, the cards Retention Bar will pass the retention
modules Retainer Tab slightly pushing away the Actuator Arm.
Once the card is fully inserted into the slot, the Retention Bar will
appear underneath the Retainer Tab.
Uninstalling the GPA Card
1. Push back the Actuator Arm to free the cards Retention Bar
from the Retainer Tab, then lift the card up until it is freed from
the AGP slot.