User`s manual

Hardware Installation

2.3 Jumper Settings for Selecting the CPUs Front

Side Bus

CPU Front Side Bus Select - Jumpers JP9 and JP10

The default setting of jumpers JP9 and

JP10 is Auto - the system will

automatically run according to the FSB

of the processor. The table below

shows the settings for different CPU

and DIMM combinations.

Warning:

If you want to manually select the CPUs FSB instead of using

its default setting which is Auto, make sure the Open Slight

Adjust field in the CPU Frequency Control submenu of the

BIOS is set to Disabled.

CPU/DIMM

Auto*

66/100MHz

100/100MHz

133/100MHz

133/133MHz

JP9

1-2 On

2-3 On

All Off

2-3 On

JP10

1-2 On

2-3 On

All Off

* denotes default setting

2-3 On1-2 On

All Off