User`s manual

Hardware Installation

Wake-On-USB Keyboard/Mouse

The Wake-On-USB Keyboard/Mouse function allows you to use a

USB keyboard or USB mouse to wake up a system from the S3

(STR - Suspend To RAM) state. To use this function:

• Jumper Setting:

JP1 and/or JP10 must be set to “2-3 On: 5VSB”. Refer to “USB

Power Select” in this chapter for more information.

•

BIOS Setting:

“USB Resume From S3” in the Power Management Setup

submenu (“Wake Up Events” section) of the BIOS must be set

to Enabled. Refer to chapter 3 for more information.

Important:

If you are using the Wake-On-USB Keyboard/Mouse function for

2 USB ports, the 5VSB power source of your power supply

must support

≥

1.5A. For 3 or more USB ports, the 5VSB

power source of your power supply must support

≥

2A.