User`s manual

34
2
Hardware Installation
PCIE2/ Mini PCIe Setting
JP8
1
3
10
12
2-5-8-11, 3-6-9-12 On:
PCIE2 signal from PCH (for x1 PCIe card)
1
3
10
12
1-4-7-10, 2-5-8-11 On:
Mini PCIe slot (default)
Note:
1. When JP6 is set to no signal, ignore JP8. (Supports Mini PCIe)
If JP6 is set to x1, make sure JP8 is set to x1, too. (Mini PCIe not
supported)
2. Use JP8’s default settings to avail the best confi gurations of the PCI
Express slots. However, not all processors provide 20 lanes of PCI
Express bus. If your processor only supports 16 lanes of PCI Express
bus, set the jumper according to the instruction shown above.