User`s manual

www.d.comAppendix A NLITE and AHCI Installation Guide
50
Appendix A
15. To create an image, select the
Create Image mode under the
General section and then click
Next.
16. Or you can choose to burn it
directly to a disc by selecting
the Direct Burn mode under
the General section.
Select the optical device and all
other necessary settings and then
click Next.
17. You have finished customizing
the Windows XP installation disc.
Click Finish.
Enter the BIOS utility to configure
the SATA controller to RAID/AHCI.
You can now install Windows XP.