User`s manual

www.dfi .comChapter 4 BIOS Setup
34
Chapter 4
Save & Exit
Reset the system after
saving the changes.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Save Changes and Reset
Discard Changes and Reset
Save Options
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
SATA SM: GLS85LS1004A CS 04GB
Launch EFI Shell from fi lesystem device
Chipset
Advanced
Main
Boot Security Save & Exit
 Select Screen
 Select Item
Enter: Select
+/
-:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Save Changes and Reset
To save the changes, select this field and then press <Enter>. A dialog box will
appear. Select Yes to reset the system after saving all changes made
.
Discard Changes and Reset
To discard the changes, select this field and then press <Enter>. A dialog box will
appear. Select Yes to reset the system setup without saving any changes.
Restore Defaults
To restore and load the optimized default values, select this field and then press
<Enter>. A dialog box will appear. Select Yes to restore the default values of all the
setup options.
Save as User Defaults
To save changes done so far as user default, select this field and then press
<Enter>. A dialog box will appear. Select Yes to save values as user default.
Restore User Defaults
To restore user default to all the setup options, select this field and then press
<Enter>. A dialog box will appear. Select Yes to restore user default.
Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash utility, AFUDOS.EXE.
Please contact technical support or your sales representative for the files.
To execute the utility, type:
A:> AFUDOS BIOS_File_Name /b /p /n
then press <Enter>.
C:\CD9A3\BIOS\afudos~1 cd9a3r34.09a /b /p /n
+--------------------------------------------------------------------------------------------------------+
AMI Firmware Update Utility(APTIO) v2.27
Copyright (C)2009 American Megatrends Inc. All Rights Reserved.
+--------------------------------------------------------------------------------------------------------+
|
|
|
|
Reading fi le ..............................
Erasing fl ash .............................
Writing fl ash .............................
Erasing fl ash ..........................
Writing NVRAM .................
Verifying NVRAM .................
Verifying NVRAM .................
Erasing BootBlock ....................
Writing BootBlock ....................
Verifying BootBlock .................
C:\CD9A3\BIOS>
done
done
done
done
done
done
done
done
done
done
After finishing BIOS update, please turn off the AC power. Wait about 10 seconds and then
turn on the AC power again.